DSE3110 Manual & Auto Start Control Module

DSE3110 Manual & Auto Start Control Module


Project Description

The DSE3110 is an outstanding compact control module that provides a comprehensive range of features for single-set applications. The controller can be used in manual or auto start mode.

OVERALL SIZE
98 mm x 79 mm x 40 mm (3.9” x 3.1” x 1.6”)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
PRODUCT VARIANTS
3110-02 – Manual & Auto Start Control Module (Can)
3110-01 – Manual & Auto Start Control Module (Mpu)
PANEL CUTOUT SIZE
80 mm x 68 mm (3.1 ” x 2.7″)
WEIGHT
0.16kg
dse-genset-productscertified-icon1
Key Features Key Benefits
Standard engine and electronic CANbus variants. Instant integration with both standard and modern electronically controlled engines.
Configurable inputs/outputs (6 digital inputs/4 outputs – 2 outputs configurable on magnetic pick-up variant). Provides multiple installation options.
Remote start input. Provides a simple connection to operate the generator from a remote location.
Comprehensive display parameters. Provides instant notification of generator voltage, generator frequency, battery voltage, engine speed and run hours via one button navigation.
Engine pre-heat. Warms the engine to a safe temperature at start-up to increase engine life.
Configurable timers & alarms. Provides excellent system flexibility.
Large back-lit icon LCD display. Displays information to the operator in a clear and concise format.
DSE Configuration Suite PC Software. Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

 

Additional Features
– LED & LCD alarm indications. – Tamper-proof hours counter.
– Power save mode.
– Alternative configuration.
– Shutdown warning protection for multiple fault conditions.
DC Supply OUTPUTS
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
OUTPUT A (FUEL)
2 A DC at supply voltage
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.
OUTPUT B (START)
2 A DC at supply voltage
CHARGE FAIL/ EXCITATION
8 V to 35 V fixed power source 2.5 W
AUXILIARY OUTPUTs C & D
2 A DC at supply voltage
NOMINAL STANDBY CURRENT
35 mA at 12 V, 30 mA at 24 V
MAXIMUM OPERATING CURRENT
55 mA at 12 V, 60 mA at 24 V

 

GENERATOR MAGNETIC PICK-UP
VOLTAGE RANGE
15 V – 333 V AC (L-N)
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
3.5 Hz to 75 Hz
FREQUENCY RANGE
10,000 Hz (max)
ELECTRO-MAGNETIC COMPATIBILITY ELECTRICAL SAFETY TEMPERATURE
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.

 

VIBRATION HUMIDITY
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

 

SHOCK DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.