DSE402MKII Waterproof Manual & Auto Start Control Module

DSE402MKII Waterproof Manual & Auto Start Control Module


Project Description

The DSE402 MKII is a waterproof Auto/Manual Start Control Module designed for generator and engine only applications. The intelligent design combines smart features with a waterproof key switch and enclosure to provide an excellent control option for wet/humid environments.

OVERALL SIZE
157 mm x 111 mm x 60 mm (6.2” x 4.4” x 2.4”)
Excludes Key Switch
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
PRODUCT VARIANTS
0402-03 – 402 MKII Waterproof Engine Control Module (Mpu)
0402-04 – 402 MKII Waterproof Engine Control Module (Hz)
0402-05 – 402 MKII Waterproof Engine Control Module with ETS (Mpu)
0402-06 – 402 MKII Waterproof Engine Control Module with ETS (Hz)
PANEL CUTOUT SIZE
132 mm x 84 mm (5.2 ” x 3.4″)
WEIGHT
0.45kg
dse-genset-productscertified-icon1
Key Features Key Benefits
Front panel waterproof key switch. Ensures the generator can only be operated when the key is used and prevents water ingress.
Potted electronics. Prevents water ingress and vibration damage.
Low oil pressure protection. Protects engine from long-term damage.
Remote start input. Provides a simple connection to operate the generator from a remote location.
Remote start input. Provides simple connection for a remote stop switch.
Engine pre-heat. Warms the engine to a safe temperature at start-up to increase engine life.
LED status indication. Provides instant system status from the front panel.
Over speed & high engine temperature protection. Protects engine from long-term damage.
DSE Configuration Suite Lite PC Software (DSE813 required). Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
DC Supply OUTPUTS
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
FUEL
15 A DC at supply voltage
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.
START
15 A DC at supply voltage
MAXIMUM OPERATING CURRENT
120 mA at 12 V, 170 mA at 24 V
PRE-HEAT
2 A DC at supply voltage
TYPICAL OPERATING CURRENT
60 mA at 12 V, 75 mA at 24 V In stop position consumption is zero.
CHARGE/FAIL EXCITATION RANGE
0 V to 35 V
ELECTRO-MAGNETIC COMPATIBILITY ELECTRICAL SAFETY TEMPERATURE
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.

 

VIBRATION HUMIDITY
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

 

SHOCK DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.