DSE6110 MKII Auto Start Control Module

DSE6110 MKII Auto Start Control Module


Project Description

The DSE 6110 MKII is an Auto Start Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets.

OVERALL SIZE
216 mm x 158 mm x 43 mm (8.5” x 6.2” x 1.5”)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
PRODUCT VARIANTS
6110-03 – 6110 MKII Auto Start Control Module
PANEL CUTOUT SIZE
184 mm x 137 mm (7.2” x 5.3”)
WEIGHT
0.5kg
dse-genset-productscertified-icon1
Key Features Key Benefits
Support for 0-10 V & 4-20mA oil pressure senders. Provides flexibility for use with multiple sensors and engine types.
Heated display option. Ensures the display continues to operate in extreme cold weather conditions.
3-phase generator sensing Provides true generator sensing.
Generator/load current monitoring & protection. Provides convenience of monitoring and protection of the generator or monitoring of the load current.
Configurable analogue/digital inputs (9). Provides multiple installation options.
Configurable DC, volt-free and staged loading outputs (6). Provides full generator load control.
CAN, MPU & alternator speed sensing (selectable depending on engine type). Ensures the module can be used with a wide number of engine types.
Tier 4 CAN engine support. Ensures the control module can be used with the latest in modern electronic engine technology.
Configurable event log (100). Provides access to historical alarms and operational status.
DSE Configuration Suite PC Software. Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
Fuel and start outputs (configurable on CAN). Provides multiple installation options.

 

Additional Features
– Configurable staged loading outputs. – Remote start input. – DSENet® expansion device compatibility (limited).
– Breaker control buttons on front fascia. – Battery voltage monitoring. – Power monitoring.
– Engine hours counter. – Up/down front panel scroll buttons. – Test button.
– Engine pre-heat.
DC Supply OUTPUTS
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
OUTPUT A (FUEL)
10 A short term, 5 A continuous, at supply voltage
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
OUTPUT B (START)
10 A short term, 5 A continuous, at supply voltage
MAXIMUM OPERATING CURRENT
100 mA at 12 V, 105 mA at 24 V
OUTPUTS C, D, e & f
2 A DC at supply voltage
MAXIMUM STANDBY CURRENT
60 mA at 12 V, 55 mA at 24 V
MAXIMUM SLEEP CURRENT
40 mA at 12 V, 35 mA at 24 V

 

INPUTS MAINS (UTILITY)
DIGITAL INPUTS A to F
Negative switching
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
ANALOGUE INPUT A
Configurable as :
Negative switching digital input 0 V to 10 V 4 mA to 20 mA 0 Ω to 240 Ω
FREQUENCY RANGE
3.5 Hz to 75 Hz
ANALOGUE INPUTS B to D
Configurable as :
Negative switching digital input 0 Ω to 480 Ω
ELECTRO-MAGNETIC COMPATIBILITY ELECTRICAL SAFETY TEMPERATURE
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.

 

VIBRATION HUMIDITY
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

 

SHOCK DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.