DSE702 Manual & Auto Start Control Module

DSE702 Manual & Auto Start Control Module


Project Description

The DSE702 is a compact control module with an hours counter display. The module offers a range of features for single-set applications including low oil pressure, high engine temperature and over speed monitoring.

The controller provides the option of manual or auto start control for the user (must specify type at time of ordering).

OVERALL SIZE
84 mm x 72 mm x 34.9 mm (3.3″ x 2.8″ x 1.4″)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
PRODUCT VARIANTS
0702-00 – 702 Auto Start Control Module (Hours Counter, DSE Logo)
0702-10 – 702 Manual Start Control Module (Hours Counter, DSE Logo)
PANEL CUTOUT SIZE
80 mm x 68 mm (3.1 ” x 2.7″)
WEIGHT
0.16kg
dse-ast-productscertified-icon1
Key Features Key Benefits
Front panel key switch. Ensures the generator can only be operated when the key is used.
Tamper-proof hours counter. Provides accurate information for monitoring warranty and maintenance requirements.
Remote start input (auto version only). Provides a simple connection to operate the generator from a remote location.
Auxiliary shutdown input (manual mode only). Provides a simple input for a remote stop switch.
LED status indication. Provides instant generator operating status.
Engine pre-heat. Warms the engine to a safe temperature at start-up to increase engine life.
Engine monitoring & protection. Protects engine from long-term damage.
LED status indication. Provides instant generator operating status.
DC Supply OUTPUTS GENERATOR
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANK
Solid state 1.2 A negative grounding terminal
VOLTAGE RANGE
15 V – 333 V AC (L-N)
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.
FUEL
Solid state 1.2 A negative grounding terminal
FREQUENCY RANGE
3.5 Hz to 75 Hz
PRE-HEAT
Solid state 1.2 A negative grounding terminal
ELECTRO-MAGNETIC COMPATIBILITY ELECTRICAL SAFETY TEMPERATURE
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.

 

VIBRATION HUMIDITY
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

 

SHOCK DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.