The DSE892 connects DSE control modules to external SNMP systems. Once a connection is made full monitoring and control functionality becomes active. The gateway device specialises in monitoring the instrumentation and operating state of the connected DSE control module.
The DSE2510 is a remote display module designed specifically for use with the DSE73xx control modules. A maximum of three remote display controls can be connected to a single host controller. The remote display can be located up to a maximum of 1km away.
- OVERALL SIZE
- 85 mm x 149 mm x 51 mm (3.3” x 5.8” x 2.0”)
- PRODUCT VARIANTS
- 0892-01 – 892 Simple Management Network Protocol (SMNP) Gateway
|Multiple DSE control module compatibility.|
|Communication port status LEDs.|
|DIN rail mount.|
|Plug & socket connections.|
|Auto generated Email/SNMP TRAP messages when control module events and operarting changes take place.|
|Customisable Email/SNMP TRAPs based upon module instrumentation values.|
|Simple Internet browser configuration.|
|SMTP client email.|
|Automatic MIB file generation to ease system integration.|
|Single DSE892 gateways can be connected to multiple control modules.|
|SNMP SET to change controller mode|
|SNMP GET for instrumentation|
|SNMP V2 compatibility|
|CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
|USB (Single DSE Controller)
RS232 (Single DSE Controller)
RS485 (Multiple DSE Controllers)
Ethernet (Multiple DSE Controllers)
Ethernet SNMP & SMTP
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 8 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
|MAXIMUM OPERATING CURRENT
200 mA at 12 V
110 mA at 24 V
|MAXIMUM STANDBY CURRENT
150 mA at 12 V
90 mA at 24 V
|ELECTRO-MAGNETIC COMPATIBILITY||ELECTRICAL SAFETY||TEMPERATURE|
|BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
|BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
|BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
|BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
|BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
|BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
|BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
|BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
|SHOCK||DEGREES OF PROTECTION PROVIDED BY ENCLOSURES|
|BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
|BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.