DSEWebNet® Mobile App Advanced Communications Solution

DSEWebNet® Mobile App Advanced Communications Solution

Project Description

DSEWebNet® Mobile Applications is the tablet/mobile version of DSEWebNet®. The software provides a web based real-time control and monitoring solution for DSE control modules. It has been developed to support single and multi-set systems using a range of devices. The software provides mapping with static locations, real time instrumentation & control, event log tables and automatic system alerts. These can be sent to multiple users via email and SMS. The software can be viewed using laptop, desktop, tablet and smart phone devices.

Generator and system information is displayed in an easy to use real-time format. Data can be transmitted through Ethernet or 3G GSM. Location information can also be achieved if an external GPS antenna is connected to the DSEWebNet® device.

The DSEWebNet® Mobile Application must be used with one of the following two devices.

DSE890 DSEWebNet® Gateway – 3G (GSM)/Ethernet
The Gateway connects to the DSE data server by integral Ethernet connection or GPRS (DSM or 3G mobile internet) and includes GPS (satellite location) functionality. This is most suited to remote and/or mobile locations.

DSE891 DSEWebNet® Gateway – Ethernet Only
The Gateway connects to the DSE data server by an integral Ethernet connection only. This is most suited for fixed installations where an ADSL / DSL cable broadband service is available (external broadband modem required, not supplied by DSE).

Free download available on:

Key Features
Minimises site visits.
Reduced maintenance costs.
Fuel management.
Fault analysis.
Asset tracking.
Automatic alerts.
Increased system up time.
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.


BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.


BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.