DSE402MKII Waterproof Manual & Auto Start Control Module
The DSE402 MKII is a waterproof Auto/Manual Start Control Module designed for generator and engine only applications. The intelligent design combines smart features with a waterproof key switch and enclosure to provide an excellent control option for wet/humid environments.
OVERALL SIZE
157 mm x 111 mm x 60 mm (6.2” x 4.4” x 2.4”)
Excludes Key Switch
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
PRODUCT VARIANTS
0402-03 – 402 MKII Waterproof Engine Control Module (Mpu)
0402-04 – 402 MKII Waterproof Engine Control Module (Hz)
0402-05 – 402 MKII Waterproof Engine Control Module with ETS (Mpu)
0402-06 – 402 MKII Waterproof Engine Control Module with ETS (Hz)
PANEL CUTOUT SIZE
132 mm x 84 mm (5.2 ” x 3.4″)
WEIGHT
0.45kg
| Key Features | Key Benefits |
|---|---|
| Front panel waterproof key switch. | Ensures the generator can only be operated when the key is used and prevents water ingress. |
| Potted electronics. | Prevents water ingress and vibration damage. |
| Low oil pressure protection. | Protects engine from long-term damage. |
| Remote start input. | Provides a simple connection to operate the generator from a remote location. |
| Remote start input. | Provides simple connection for a remote stop switch. |
| Engine pre-heat. | Warms the engine to a safe temperature at start-up to increase engine life. |
| LED status indication. | Provides instant system status from the front panel. |
| Over speed & high engine temperature protection. | Protects engine from long-term damage. |
| DSE Configuration Suite Lite PC Software (DSE813 required). | Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring. |
| DC Supply | OUTPUTS |
|---|---|
| CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous |
FUEL 15 A DC at supply voltage |
| CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. |
START 15 A DC at supply voltage |
| MAXIMUM OPERATING CURRENT 120 mA at 12 V, 170 mA at 24 V |
PRE-HEAT 2 A DC at supply voltage |
| TYPICAL OPERATING CURRENT 60 mA at 12 V, 75 mA at 24 V In stop position consumption is zero. |
|
| CHARGE/FAIL EXCITATION RANGE 0 V to 35 V |
| ELECTRO-MAGNETIC COMPATIBILITY | ELECTRICAL SAFETY | TEMPERATURE |
|---|---|---|
| BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment. |
BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment. |
BS EN 60068-2-1 Ab/Ae Cold Test -30°C. |
| BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment. |
BS EN 60068-2-2 Bb/Be Dry Heat +70°C. |
| VIBRATION | HUMIDITY |
|---|---|
| BS EN 60068-2-6 Ten sweeps in each of three major axes. 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn. |
BS EN 60068-2-30 Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours. |
| BS EN 60068-2-78 Cab Damp Heat Static 40° C @ 93% RH 48 Hours. |
| SHOCK | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES |
|---|---|
| BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 ms. |
BS EN 60529 IP65 – Front of module when installed into the control panel with the optional sealing gasket. |
