The DSE4610 is a compact Auto Start Control Module that has been developed to provide an outstanding range of features within a compact enclosure.
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.5”)
8.0 mm (0.3”)
4610-03 – 4610 Auto Start Control Module (Mpu,Ct,Rtc)
118 mm x 92 mm (4.6″ x 3.6″)
|Key Features||Key Benefits|
|Large back-lit icon LCD display.||Displays information to the operator in a clear and concise format.|
|3-phase generator sensing.||Provides true generator sensing.|
|600 V ph-ph nominal system compatibility.||Provides global flexibility.|
|Generator & load power monitoring (kW, kV A, kV Ar, pf).||Provides clear accurate power measurement information.|
|Generator overload protection (kW).||Provides engine overload protection.|
|Configurable inputs & outputs.||Provides multiple installation options.|
|Configurable DC, volt-free and staged loading outputs.||Provides multiple installation options.|
|Fuel & crank outputs.||Provides controlled engine starting and stopping.|
|Magnetic pick-up speed sensing.||Provides full monitoring flexibility.|
|Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.||Ensures the engine is fully monitored for improved operating performance.|
|Battery voltage monitoring.||Ensures the battery maintains enough power at all times.|
|Configurable event log (50).||Provides access to historical alarms and operational status.|
|DSE Configuration Suite PC Software.||Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.|
|– Power save mode.|
|– Engine maintenance alarms (3).|
|– Alternative configuration.|
|CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
|OUTPUT A (FUEL)
10 A short term, 5 A continuous, at supply voltage
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
|OUTPUT B (START)
10 A short term, 5 A continuous,
at supply voltage
|MAXIMUM OPERATING CURRENT
85 mA at 12 V, 96 mA at 24 V
|AUXILIARY OUTPUTs C & D
2 A DC at supply voltage
|MAXIMUM STANDBY CURRENT
51 mA at 12 V, 47 mA at 24 V
|MAXIMUM SLEEP CURRENT
35 mA at 12 V, 32 mA at 24 V
|MAXIMUM DEEP SLEEP CURRENT
10 uA at 12 V, 10 uA at 24 V
15 V to 415 V AC (Ph-N)
26 to 719 V AC (Ph – Ph)
+/- 0.5 V to 70 V
3.5 Hz to 75 Hz
10,000 Hz (max)
|ELECTRO-MAGNETIC COMPATIBILITY||ELECTRICAL SAFETY||TEMPERATURE|
|BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
|BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
|BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
|BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
|BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
|BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
|BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
|BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
|SHOCK||DEGREES OF PROTECTION PROVIDED BY ENCLOSURES|
|BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
|BS EN 60529
IP65 – Front of module when installed into the control panel with the optional sealing gasket.