Sarvap

DSE6010MKII Auto Start Control Module

The DSE 6010 MKII is an Auto Start Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets.

OVERALL SIZE

216 mm x 158 mm x 43 mm (8.5” x 6.2” x 1.5”)

MAXIMUM PANEL THICKNESS

8.0 mm (0.3”)

PRODUCT VARIANTS

6010-03 – 6010 MKII Auto Start Control Module

PANEL CUTOUT SIZE

184 mm x 137 mm (7.2” x 5.3”)

WEIGHT

0.48kg

Key Features	Key Benefits
Support for 0-10 V & 4-20mA oil pressure senders.	Provides flexibility for use with multiple sensors and engine types.
Large back-lit icon LCD display.	Displays information to the operator in a clear and concise format.
Heated display option.	Ensures the display continues to operate in extreme cold weather conditions.
3-phase generator sensing.	Provides true generator sensing.
Breaker control buttons on front fascia.	Instant breaker control when working with a control module.
Generator & load power monitoring (kW, kV A, kV Ar, pf).	Provides clear accurate power measurement information.
Generator overload protection (kW).	Provides engine overload protection.
Generator/load current monitoring & protection..	Provides convenience of monitoring and protection of the generator or monitoring of the load current.
Configurable analogue/digital inputs.	Provides multiple installation options.
Configurable DC, volt-free and staged loading outputs.	Provides full generator load control.
CAN, MPU & alternator speed sensing (selectable depending on engine type).	Makes the module ideal for standard and electronic engine applications.
Tier 4 CAN engine support.	Ensures the control module can be used with the latest in modern electronic engine technology.
Configurable event log (50).	Provides access to historical alarms and operational status.
DSE Configuration Suite PC Software.	Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
Fuel and start outputs (configurable on CAN).	Provides multiple installation options.

Additional Features

– Engine maintenance alarms (3).	– Engine run time scheduler.	– Backed-up real time clock.	– Configurable remote start input.
– Engine hours counter.	– Engine idle control for start/stop.	– Battery voltage monitoring.	– Alternative configuration (1).
– Engine pre-heat.	– Manual fuel pump control.	– Start on low battery.	– Comprehensive warning, electrical trip or shutdown protection on fault conditions.
– Engine speed protection.

DC Supply	GENERATOR & MAINS (UTILITY)
CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous	VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph)
CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.	FREQUENCY RANGE 3.5 Hz to 75 Hz
MAXIMUM OPERATING CURRENT 100 mA at 12 V, 105 mA at 24 V	OUTPUTS C, D, e & f 2 A DC at supply voltage
MAXIMUM STANDBY CURRENT 60 mA at 12 V, 55 mA at 24 V
MAXIMUM SLEEP CURRENT 40 mA at 12 V, 35 mA at 24 V

INPUTS	OUTPUTS
DIGITAL INPUTS A to F Negative switching	OUTPUT A (FUEL) 10 A short term, 5 A continuous, at supply voltage
ANALOGUE INPUTS A to C Configurable as: Negative switching digital input 0 Ω to 480 Ω	OUTPUT B (START) 10 A short term, 5 A continuous, at supply voltage
ANALOGUE INPUT D Configurable as: Negative switching digital input 0 V to 10 V 4 mA to 20 mA 0 Ω to 480 Ω	AUXILIARY OUTPUTs C, D, E & F 2 A DC at supply voltage

ELECTRO-MAGNETIC COMPATIBILITY	ELECTRICAL SAFETY	TEMPERATURE
BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment.	BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment.	BS EN 60068-2-1 Ab/Ae Cold Test -30°C.
BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment.		BS EN 60068-2-2 Bb/Be Dry Heat +70°C.

VIBRATION	HUMIDITY
BS EN 60068-2-6 Ten sweeps in each of three major axes. 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.	BS EN 60068-2-30 Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
	BS EN 60068-2-78 Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

SHOCK	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 ms.	BS EN 60529 IP65 – Front of module when installed into the control panel with the optional sealing gasket.